ee country flag EE

The Original Portable Tilting Car Jack

AUTOLift 3000

AUTOLift3000 is the most convenient lifting solution for virtually any garage, repair shop, or detailing center.

There’s no need to squeeze under your car on a creeper anymore or perch your vehicle precariously on a hand jack.
Instead of using dangerous, outdated lifting solutions, use the industry’s first portable tilting car jack, the AUTOLift3000. Join more than 20,000 satisfied mechanics on all continents. You’ll save time and make your work on any vehicle safe and easy. Every car enthusiast or mechanic will appreciate product’s versatility.

From
€1,270.00
(VAT included)
  • Free shipping
  • 3-Year warranty
  • 6 types of accessories included
Buy now
Ships on 11.10 2024

Why Choose AUTOLift3000

  • The AUTOLift3000 is certified to lift up to 6,614 lbs, or 3,000 kg.
  • Lifting to maximum height (23.5 in / 60 cm) takes no more than 30 seconds.
  • The AUTOLift3000 is completely maintenance-free. It is a fully mechanical device that does not require safety inspections, regular maintenance, or permanent mounting.
  • At just 99 lbs, the AUTOLift3000 can be operated and handled by a single person.
  • The AUTOLift3000 is highly compact, folding down to just 4.5 in tall. It can also be hung on a wall (see the Wall Hanger in Accessories).
  • The AUTOLift3000 can be used indoors and outdoors. It’s water resistant and can even be used on uneven surfaces (see Uneven Surface Rails in Accessories).
  • Every AUTOLift3000 portable car lift comes with a no-nonsense 3-year product warranty, and a 1-year warranty on accessories.
  • The AUTOLift3000 allows you to tilt the lifted vehicle on its center axis, lifting either the front or rear off the ground. Lifting the car by a point near its center of mass makes tilting easy enough for a single operator.
  • The AUTOLift3000 is available in 80 countries with more than 20,000 units sold and delivered.

    It’s designed, manufactured, and assembled in the EU in an ISO 9001:2015 certified factory. Each unit is carefully tested for quality and material strength, and comes with a manufacturer’s inspection certificate.

    The AUTOLift3000 is in active use at one of Europe’s largest carmakers.

  • Say goodbye to cords. The AUTOLift3000 only needs a strong power drill (not included) to lift and lower a vehicle. There’s no need for an air compressor or messy air lines.
    The AUTOLift3000 is a portable, strictly mechanical vehicle lift with no pneumatic or hydraulic components.

20+

Years on the market

20,000+

Satisfied customers

200,000+

Cars lifted

80+

Countries

Who Uses AUTOLift3000

  • The AUTOLift3000 lets you do all kinds of repair work on passenger cars and small utility vehicles weighing up to 3,000 kg / 6,614 lbs. Oil changes, replacement or repair of brakes, shock absorbers, and clutches, undercarriage work, etc. The AUTOLift3000’s simplicity and speed of use is of particular value to quick repair shops. A full vehicle inspection can very easily be done on nearly any surface.
  • The AUTOLift3000 can fully replace the classic car jacks used in tire shops. You can fix the AUTOLift3000 in a horizontal position (see the Horizontal Support Stand in Accessories) and work on all four wheels at once.
  • The AUTOLift3000 was originally developed in the 1990s to reduce the time required for towbar installation. The vehicle tilt feature cut the required work time in half. Installing a towbar requires work both inside the trunk (wiring) and under the car (the towbar itself). This would normally require the car has to be lifted and set down multiple times; the AUTOLift3000’s tilting capability greatly reduces this need. That makes the AUTOLift3000 very popular with towbar mechanics.
  • You’ll learn to love doing your own tire and oil changes. The AUTOLift3000 makes minor repairs and bodywork much easier. DIY mechanics are delighted with the many uses of the AUTOLift3000!
  • The AUTOLift3000 provides access to those hard-to-reach areas in a vehicle’s undercarriage and wheel wells. The lift tilts both front and rear to expose tough grime. And because the AUTOLift3000 is water resistant, there’s no need to fear seizing or corrosion, even when using a pressure washer.
  • The AUTOLift3000 is the ideal backup when a powered vehicle lift is down for maintenance, or you just have more orders than workstations. Increase your shop’s productivity and reduce customer wait times by using the AUTOLift3000 for pre-inspections.
  • Whether you’re painting door sills, coating a rocker guard, or touching up frame rails, the AUTOLift3000 is the perfect addition to any paint shop. With the Uneven Surface Rail accessory, it can even be used inside the paint booth. When it’s not needed, it stores in a neat and compact package.
  • Use the AUTOLift3000 to show off your new car stock in eye-catching positions, or let your customers inspect the underside of used cars right there in your showroom. The AUTOLift3000 doesn’t take up precious showroom space, but it certainly does add to the shopping experience!
  • Struggling to wrap hard-to-reach parts is a thing of the past. Get your vinyl wraps into all the tough spots faster and hassle-free with the AUTOLift3000. You can position the car however you need, reducing application time and the risk of costly mistakes.

Total Customer Satisfaction

  • Septimiu Lapusan Glendale AZ

    It’s an amazing tool for small private garages and small businesses. I first saw this product two years ago, and I kept thinking about buying it since then. Now it's finally here! Great European quality and workmanship!

  • Bob Jones Pennsylvania, US

    The package arrived today, I've already assembled it, works great. Very happy with the product and will use often when the weather gets warmer.

  • Marusi Kawasaki Japan

    Usability is great!
    I use the AUTOLift3000 for painting the body and undercarriage, replacing exhaust parts, and often to replace fenders too.

  • Adam AchsCanada

    Over the past few months the product met or exceeded my expectations in every way, and I've lifted a wide variety of cars with it already.

  • Peter Colorado, US

    We wouldn’t be able to do our job without the AUTOLift3000. It’s easily one of our garage’s most important tools now. We’re a small shop with very limited space, so the fact it stores so well is a huge plus…

  • Scott US

    I am extremely satisfied with this investment in a well built tool. The lift is very compact as it folds down flat and hangs vertically, and setup just takes a quick minute or so before you can get to work…

And thousands more..

Play Video

Technical Parameters

Capacity 3,000 kg / 6,614 lbs
Dimensions 1635 x 1300 x 115 mm
64.5 x 51.25 x 4.50 inch
Net Weight 45 kg / 99 lbs
Max Lift Height 60 cm / 23,50 inch
Lift Speed 25 - 30 s
Platform Width 1300 mm - 1650 mm
51.18 - 64.96 inch

Accessories (included in the package)

  • Used for lifting cars with fragile body parts (e.g. plastic aftermarket skirts). Make sure the entire rubberized pad surface rests on the rail!

  • The drill adapter is designed as breakable. When the maximum height of the AUTOLift3000 is accidentally exceeded, the adapter crown snaps off to protect the lift. That's why we include a set of 4 with the product.

  • Should be used whenever the AUTOLift3000 is in the lifted position, to fix it in place. Make sure to remove the safety pin before lowering the car!

  • Hang the AUTOLift3000 on the wall of your garage. Very popular with home users in particular. Aside from saving space, these hangers also add a touch of style to your garage.

  • Need to lift your car on gravel, sand, grass, or any other uneven surface? No problem, just attach these rails and you're ready to go. The rails also protect floors you don’t want scratched.

  • A safety accessory to hold up the lifted side of the vehicle. Make sure to remove the stand before lowering the car! Adjustable height: 670 - 1,150 mm / 26.3 - 45.3 in.

How to Use

The AUTOLift3000 is the original tilting, portable car jack, great for any private or commercial garage. No air no power supply required.

The AUTOLift3000 is extremely easy to use. It doesn't need installation works, special tools, or specialist training.

It’s portable and can be used anywhere. You don’t need compressed air, and there are no wires to worry about. The lifting action is provided by an ordinary electric drill (stronger cordless drills will also work, as will hand cranks and ratchets).

For more information see the User Manual

From
€1,270.00
(VAT included)
  • Free shipping
  • 3-Year warranty
  • 6 types of accessories included
Buy now
Ships on 11.10 2024

FAQ

  • The AUTOLift3000 is certified up to 6,614 lbs / 3,000 kg. While the device has been stress-tested to much greater weights, for your safety it is nonetheless strictly forbidden to exceed the certified limit.
  • Standard power drills only. Make sure to keep the hammer function off if it has one. Never use any tool that generates shocks (e.g. impact or pneumatic wrench). The recommended torque to lift the device is 309 inch-lb / 25 ft-lb.
  • The tool can only be used with unibody passenger cars, which trucks typically are NOT. The car also must not exceed the maximum weight capacity of 6,614 lbs, and must have ground clearance at least a little higher than the height of the folded product (115 mm / 4.5 in). To lift a lower-riding car, you will need a ramp.
  • For as long as needed (weeks, months, a year).
  • Please feel free to contact our customer service line at info@autoliftproduction.com.
  • Even when a car is lifted by its center of mass, a certain amount of effort is needed to tilt it over. It cannot really tip over on its own, unless you substantially change the weight distribution by removing heavy parts (e.g. engine, gearbox, clutch). When doing work that removes or adds substantial weight to the car, always use the support stand to prevent unexpected tilting.
  • Without factory schematics or specialized equipment, you will need to use trial and error. For a front-engined car, try putting the lift pads about 4 in (10 cm) behind the front wheels. Lift the car up just a little, and see if it tilts easily. If not, lower it back down and move the AUTOLift3000 closer to the end that didn't lift off the ground.
    It’s fun!
  • On some cars (e.g. the Mercedes-Benz CLA and some other German cars), the plastic parts are firmly attached to the undercarriage frame. On cars where this is not the case, use the provided skirt pads. Place the pad on the AUTOLift3000 contact surface and make sure it will come to rest on a load-bearing undercarriage part. Before lifting the car, check that the lift pads don't rest on any fragile body parts. We cannot be held responsible for any damage to your car that may result from failure to follow these instructions.
  • The maximum width of the AUTOLift3000 is 62" / 158 cm.
  • The product does not require maintenance. You should still check all its components for damage (e.g. from shipping or handling) before using it. If used correctly, the product can last a very long time: Some of our original customers have used the same unit for over 20 years.
  • Yes. The AUTOLift3000 is covered by a 3-year warranty.
  • Yes, we have distributors and service centers worldwide. Please contact our customer service at info@autoliftproduction.com if there are any problems.